Product Information
Type 4X Polyester Junction Box (Solid Cover)
PJU Series
Continuous Hinge Door with Snap Latches
Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.
Inner Panel not included, order part number 14R1513
Standards
- UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18" x 16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosure available with clear Polycarbonate cover to 16" x 14".
Molded hinge with stainless steel pin.
Captive oil resistant gasket provides a positive seal.
Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
