Vandal Resistant Outdoor Access Control Keypad

Features

1,100 Users over 2 Outputs. Codes may be 4~8 digits: - Output #1 – Form C relay, 1A@30VDC, 1,000 users - Output #2 – Form C relay, 1A@30VDC, 100 users
Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Super user code gives admin access to keypad
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Programmable egress input with optional warning alarm and delayed egress
Real-time clock to auto-disable access at specific times
Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2
Duress code signals a silent alarm if an authorized user is forced to open the door under duress
12~24 VDC/VAC Auto-adjusting operation
All features are programmed directly from the keypad: No need for an external programmer
IP66 Weatherproof Rating
Mounts to a standard single-gang back box (surface-mount back box included)
Durable and attractive stainless steel faceplate
Tamper output: N.C. Dry contact, 50mA@24VDC max.
Keypad illuminates when a button is pressed; backlight can be programmed for FULL, AUTO, or OFF in standby mode
Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
Door sensor input for anti-tailgating operation
Door-propped-open warning
Door-forced-open warning
EEPROM Memory protects programmed information in case of power loss

No items found.